The federal lockout/tagout standard, 29 CFR 1910.147, published by the Occupational Safety & Health Administration (OSHA), went into effect in 1989. It was designed to prevent injuries and deaths Yes, LOTO Tags are required in Lockout/Tagout procedures as per OSHA. The lockout/tagout standard, 29 CFR 1910.147, specifies that tags must be used as an integral part of the LOTO program to indicate that the equipment is being serviced or maintained and should not be turned on until the maintenance or servicing is complete. Define the procedures for placing, removing, and testing the effectiveness of lockout/tagout devices. In addition, you must: Provide locks, tags, and related equipment that meet OSHA standards. Inspect energy control procedures at least annually and correct problems. Train employees to understand and follow LO/TO procedures. Recently, one of our subscribers asked the following question: Our general energy control LOTO procedure states that the key for a persona lock must be secured and controlled on a person when the LOTO lock is being used. Does the standard cover this? OSHA interprets the LOTO rule requirement for who controls the lockout devices (see 29 CFR 1910 A lockout/tagout procedure is a safety protocol used in various industries to ensure the safety of workers during the maintenance or repair of machinery or equipment. It involves locking and tagging the energy sources of the equipment to prevent accidental startup or release of hazardous energy. This procedure helps to protect workers from The five steps are: Develop and document your energy control policy/program. Create and post written, equipment-specific lockout procedures. Identify and mark all energy control points. Train your employees, communicate and conduct periodic inspections. Equip your employees with the proper lockout tools and warning devices. This program is a great tool for training affected and authorized employees in lockout/tagout procedures. This includes workers in kitchens, laundry rooms and maintenance. Topics include authorized and affected associates, the sequence of steps in a lockout procedure, the annual inspection process, lockout hardware and the one exception to the LOTO stands for Lockout-Tagout and is a safety procedure used to ensure that hazardous energy sources are isolated and controlled before maintenance or servicing is performed on machinery or equipment. LOTO involves the use of locks and tags to physically prevent the activation or release of energy to equipment or machinery. The first thing to know is that a lockout/tagout alternative should complement your existing lockout/tagout procedures, not replace them entirely. Because lockout/tagout alternatives only apply to select circumstances and machines, your organization should still have a lockout/tagout policy and procedure in place that your employees are trained 7ORb.

lock in lock out procedure